Type : VRS
Traction board
PRODUCTS

Traction mat – recovery tracks

What is traction mat?

Traction mats are a must-have solution for drivers any off-road surfaces or during inclement weather.

For example, with recovery tracks, you can easily get out your vehicle of the snow, mud or sand.

The non-slip surface give you to extracting you on all slippery terrain.

Whatever the driving, road or weather conditions, with the traction mat you always have a solution for a vehicle motion or extraction.

By adhering to the slippery surface and to the vehicle tire they provide the necessary traction to get the vehicle in motion.

Made from high-strength textile materials coated with a specific polymer, our recovery tracks benefit from many innovations*, they are rollable, light, resistant and does not represent any risk for the vehicle.

How use traction mat?

The rolling up facilitates its storage and deployment speed.

Also very resistant, repairable, impervious to mud and sand, compact, light and easy to clean. They can therefore be reused immediately when needed.

This traction tool is easily to install and remove after use.

One part of these recovery traction mat board slips easily into the rut, another allows the wheel to be released. The upper part is equipped with studs and devices that improve the grip of the wheels to prevent slipping.

They have proven their effectiveness: in the majority of cases listed, vehicles are rescued in less than 15 minutes.

Traction mats have been successfully evaluated by the STAT (French Army Technical Section) and have been acquired by many armies, including the French Army.

Characteristics of mustmove® vrs traction mat

Our traction mat recovery tracks offer an exceptional result and a multiple use especially in cases of use with military vehicles over 3.5 Tons.

We manufacture Mustmove® VRS roll-up traction mat from a reinforced technical textile coated with a specific polymer.

A kit consists of two flexible recovery mats and an innovative set of anchors*.

These consist of an aluminum anchor piece, a flexible link made of high-tenacity textile, and a device for arming and locking the anchors.

This allows quick and easy installation of the anchors, as well as a total absence of danger for the wheels in case of rolling on the anchors, unlike metal stakes.

Anchor installation and retrieval can be done in less than a minute.

* Patent granted

What are recovery tracks guarantees?

  • The flexibility: innovative design and non-slip surface ensure traction mat’s flexibility.
  • The robustness: thanks to a reinforced technical textile coated with a specific polymer, the traction mat is very resistant.
  • The lightness: It is easy to use recovery track thanks to its height. For transport, this is practical to put in the trunk.
  • The adherence: thanks to specific polymer, traction mat recovery track adheres to grounds.
  • The security: no risk to damage vehicles.

 

Use case for off recovery tracks

  • 4×4 self recovery mat
  • De-sliding of heavy trucks in External Operations (OPEX)

Technical characteristics of roll-up traction mat

We manufacture Mustmove® VRS roll-up  traction mat from a reinforced technical textile coated with a specific polymer.  A kit consists of two flexible recovery mats and an innovative set of anchors*. These consist of an aluminum anchor piece, a flexible link made of high-tenacity textile, and a device for arming and locking the anchors. This allows quick and easy installation of the anchors, as well as a total absence of danger for the wheels in case of rolling on the anchors, unlike metal stakes. Anchor installation and retrieval can be done in less than a minute.

Non-contractual data for information purposes
RefApplicationTotal weightCompositionRoll up sizes
VRS M

 < 3,5 T Vehicules

<6600 lbs

9 kg

20 lbs

2 VRS traction mat :

1500 x 375 mm

4.9′ x 1.2′

(4kg-9lbs) each

1 stake for anchors

2 anchors

VRS M mat

Ø 200 x 375 mm

Ø7.8′ x 1.2′

VRS L

≤12 T Vehicules

≤ 26500 lbs

15 kg

33 lbs

2 VRS traction mats:

1950 x 500mm

6.3′ x 1.6′

(6kg-13 lbs) each

1 stake for anchors

2 anchors

VRS L mat

Ø 250 x 500 mm

Ø 9.8′ x 1.6′

VRS XL

> 12 T Vehicules

> 26500 lbs

35 kg

77 lbs

2 VRS HV traction mats :

2450 x 750mm

8′ x 2.4′

(17kg-37 lbs) each

1 stake for anchors

4 anchors

VRS XL mat

Ø 350 x 750 mm

Ø 13.7 ‘ x 2.4’

Traction mats advantages

  • Very compact rolled up
  • Easy to install
  • Impermeable to mud and sand
  • Non-slip surface
  • Easy to clean and remove
  • Puncture resistant
  • Repairable
  • Long service life
  • Custom made to order

Optional accessories for traction mat

FRENCH DESIGN AND MANUFACTURING

CONTACT
You want contact us ?

You have a project or a problem to solve ? Fill out our contact form to send us your request. Our team of experts will get back to you as soon as possible.

  • Max. file size: 10 MB.
  • To learn more about the management of your personal data and to exercise your rights, please refer to the personal data management policy.
  • This field is for validation purposes and should be left unchanged.

Scroll to Top