High pressure plug
Why use high pressure plug ?
High pressure plug is designed to retain a back pressure up to 3 bar. They plug the circular pipes. It is imperative before any use to check the resistance of the pipe to pressure. These plugs retain a water column of 30 meters.
Range of intervention.
The high pressure pipe plug is expandable. It covers the range of pipes from 100 to 1000mm in only 8 plugs.
Case of use of high pressure pipe plugs
- Buoyancy of complex metallic structures at sea
- Leakage test under pressure of pipelines
- Insulation of pipe sections during maintenance operations
- Flow diversion
- Blockage of the flow in the pipe
Technical characteristics of high pressure plug
We manufacture high pressure plug made of rubber-coated aramid fabric. We vulcanize them in pressure moulds to have a homogeneous product.
The inflatable pipe plugs have a female ¼ BSP inflation tube. An inflation hose, connected either to a hand pump or a compressor, is connected to it.
The high pressure plugs are equipped with handling rings.
We recommend that you read the precautions for use before using a pipe plug.
|Reference||Minimum Diameter||Maximum Diameter||Length||Inflatable pressure||Back pressure|
Non-contractual data for information purposes
Advantages of High pressure plug
- Homogeneously vulcanized from elastomer coated fabrics
FRENCH DESIGN AND MANUFACTURING
You have a project or a problem to solve ? Fill out our contact form to send us your request. Our team of experts will get back to you as soon as possible.